K&TK

AR 8 Series Flying Bumper

• Components: 15″ x 1 Woofer
• Power handling: 700W
• Sensitivity: 99dB @1m/1Watt
• Peak SPL: 128dB
• Impedance: 4Ω
• 780 x 550 x 600mm (W x H x D)
• 37.5kg

• • Stereo Mode: 8Ω (EIA/1kHz): 650W, 4Ω (EIA/1kHz): 950W (0.1% THD)
  • Bridge Mode: 8Ω (EIA/1kHz): 1900W (0.1% THD)
  • Total Harmonic Distortion (THD): 8Ω (1kHz, 50W): 0.0003%, 4Ω (1kHz, 100W): 0.005%
  • Frequency Response: 20Hz ~ 50kHz (±0.5)
  • Signal to Noise: >-105dB (20Hz ~ 20kHz)
  • Damping Factor: 8Ω @ 20Hz~1kHz: >6000:1, 8Ω @ 10kHz: >1500:1
  • Input Impedance: 20k Ohms, Balance
  • Output Circuitry: 2-tier Class-H
  • Cooling: 2 Variable speed DC FAN
  • Controls: Front panel attenuator, Rear panel mode & Gain Switches
  • Protection: Thermal, Turn-on bursts, Load protected against DC faults, Short circuit
  • Connectors: Combination jack with 3 poles Female XLR socket + 1/4″ phone jack, Male XLR, Power-10A IEC Mains

<

• Three-way Passive Speaker
• Hi: 1″ND, Low : 12″, Mid : 1″ND driver
• Hi: 25.4mm, Low : 50.5mm, Mid : 34mm Voice Coil
• 80Hz ~ 20kHz, 8Ω
• 99dB @1m/1Watt, Max 123dB SPL
• PEAK 900W, RMS 300W
• Polyurea, Plywood, Black(white) Water painting
• 360 x 582 x 346mm (W x H x D)
• 15.6kg

• Two-way Passive Speaker
• Hi: 1″ND driver, Low 10″
• Hi: 25.4mm, Low 35.5mm Voice Coil
• 100Hz ~ 20kHz, 8Ω
• 98dB @1m/1Watt, Max 123dB SPL
• PEAK 800W, RMS 250W
• Polyurea, Plywood, Black(white) Water painting
• 345 x 508 x 305mm (W x H x D)
• 11.2kg

Parrot Series Carrying Case for Parrot Series Culumn Array

• 4″ Passive Full-range & 12″ Active Subwoofer
• 4″ x 8, 320watts @AES, PEAK 1600W, 4Ω
• 100Hz – 19kHz, 20.4mm Voice Coil
• 98dB @1m/1Watt, Max 127dB SPL, ND+Ferrite
• Polyurea Coated Paint
• DSP, Bluetooth
• With Dedicated Pole Bracket

• 8Ω/EIA/1kHz/0.1%THD: 180W
• 4ch Mode (4Ω/EIA/1kHz/0.1%THD): 300W
• 2Ω/EIA/1kHz/0.1%THD: 450W
• Bridge Mode (8Ω/EIA/1kHz/0.1%THD): 600W
• Total Harmonic Distortion (THD) 8Ω (1kHz): 0.001%
• Total Harmonic Distortion (THD) 4Ω (1kHz, 1/8W output): 0.002%
• Frequency Response (8Ω, 1W): 20Hz ~ 50kHz (±0.5dB)
• Signal to Noise (20Hz~20kHz): >-105dB
• Damping Factor (8Ω @ 20Hz~1kHz): >-3000:1
• Damping Factor (8Ω @ 10kHz): >-2000:1
• Input Impedance: 20k Ohms, Balance
• Output Circuitry: Class-A/B
• Cooling: 2 variable speed DC FAN
• Controls: Front panel attenuator, Rear panel mode & Gain switches
• Protection: Thermal, Turn-on bursts, Load protected against DC faults, Short circuit
• Connectors: Female XLR, Male XLR, Power-10A IEC Mains
• Dimensions (H*W*D): 3.5″(2RU) x 19″ x 9.9″ (88mm x 483mm x 253mm)
• Weight: Net/Shipping: 6.4kg / 7.4kg